Motion control CPU
Motion axis : 12 (4 pulse control axis + 8 EtherCAT axis)
Encoder axis : 4 channel encoder
Pulse output : 8 x 200KHz
Extension modules :16
Left side extension : 2 (Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x EtherCAT, 1 x RS485
Support : 2 x RS232 /485 extension and 1 x CAN extension
Protocols : EtherCAT, Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP
Program storage 10Mbyte
Data storage 20Mbyte（512KB non-volatile）
Dimensions(WxHxD:mm) 53x100x80
Other interface : Type C，TF card(need TF card extension module)
CAM and ITP motion : Support CAM and interpolation motion
Built in IO : 8 input / 8 output
Programming language : Structured Text (ST), Ladder Diagram (LD), Sequential Function Chart (SFC), Continuous Function Chart (CFC)
Power input : DC24V

Brushless Motor with round shaft

Brushless Motor with shaft for gearbox

Hollow Shaft Flat Gearhead for BL2M Motor

Hollow Shaft Flat Gearhead for BL2M Motor

Hollow Shaft Flat Gearhead for BL2M Motor

in-line linear actuator with DC motor
Type : CON35 without Hall sensors
with Molex minifit-connector
front & rear bracket in Alu

BLDC Servo Motor

BLDC Servo Motor

Integrated Servostepmotor

Electric cylinder MCE45 with AZ stepping motor AZM48
+ Ball Screw 10x03
+ Motor side drive

Linear actuator PNCE40
Ball screw 16x05

Electric cylinder PNCE40 with AZ stepping motor AZM69
+ Ball Screw 16x05
+ Motor side drive

Stainless Steel Worm gearmotor
Size: N63
Mounting: UNI (Standard)
Position: N
Output rpm (n2 [min-1]): 23,33
Output torque (M2M [Nm]): 94
Service factor (fs): 1,4
Output shaft: 0 (Hollow output shaft)
Left protection cap: C (Closed)
Right protection cap: N (Without protection cap)
Terminal Box Position: C

CPU with dual Ethernet port
Motion axis : 4 pulse control axis
Encoder axis : 4 channel encoder
Pulse output : 8 x 200KHz
Extension modules :16
Left side extension : 2 (Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x RS485
Support : 2 x RS232 /485 extension and 1 x CAN extension
Protocols : Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP
Program storage 10Mbyte
Data storage 20Mbyte（512KB non-volatile）
Dimensions(WxHxD:mm) 53x100x80
Other interface : Type C，TF card(need TF card extension module)
CAM and ITP motion : Support CAM and interpolation motion
Built in IO : 8 input(sink/source) / 8 output (source)
Programming language : Structured Text (ST), Ladder Diagram (LD), Sequential Function Chart (SFC), Continuous Function Chart (CFC)
Power input : DC24V

Hybrid linear actuator, captive type with
+ resolution (mm/step) : 0.0031
+ AB nut
+ Teflon Coated Screw

Hybrid actuator

Integrated Servostepmotor
Ø6.35x20 mm D-cut
Shaft: IP65 - Sealing
Motor: IP42

Inline DC Actuator iCON35
Integrated controller - Single/Position/Position (SPP)
Black cable with Molex Minifit Connector
Alu brackets

Linear unit MTJ 65
Carriage: long
Number of carriages: 1
Drive pulley: right with keyway
Inox protection cover