Tandwiel en ketting
Omschrijving
When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.
Dimensioning and Efficiency
The calculation can be made with this tool : MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.
Note regarding the Breaking Load
The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation).
Mounting and Maintenance
The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used.
Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application.
Determining the Chain Length
The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.
Note: this link reduces the load bearing capacity of the chain by 20%.
Enkele producten uit deze categorie
| Products | ||
|---|---|---|
|
10677004
Maedler Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
10677000
Maedler Self-lubrication roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
10611000
Maedler Sprocket KRS with hub 10 B-1 5/8x3/8" 10 teeth material steel |
|
|
10611500
Maedler Sprocket KRS with hub 10 B-1 5/8x3/8" 15 teeth material steel |
|
|
10313600
Maedler Sprocket KRS with hub 083 1/2x3/16" 36 teeth material steel |
|
|
14099001
Maedler Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing |
|
|
77141200
Maedler Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 212mm, for diameter 8 mm |
|
|
10099613
Maedler Sprocket KRR with hub pitch 6mm 13 teeth material stainless steel 1.4301 (AISI 304) |
|
|
10001500
Maedler Sprocket KRS with hub pitch 4mm 15 teeth material steel |
|
|
10700301
Maedler Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side |
|
|
14031200
Maedler Chain coupling pitch 3/4 x 7/16" 18 teeth nominal torque 600Nm |
|
|
13611800
Maedler Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 18 teeth material steel |
|
|
14036018
Maedler Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing |
|
|
12600000
Maedler Double-strand roller chain DIN ISO 606 10 B-2 pitch 5/8x3/8" |
|
|
14000515
Maedler Chain tensioning wheel KSP 08 B-1 1/2x5/16" 15 teeth with ball bearing |
|
|
12600300
Maedler Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" |
|
|
10001400
Maedler Sprocket KRS with hub pitch 4mm 14 teeth material steel |
|
|
10199000
Maedler Roller chain similar to 06 B-1 pitch 3/8x7/32" material stainless steel 1.4301 |
|
|
14099501
Maedler Sprocket set for chain tensioners 06 B-1 3/8" x 7/32" Z=15 stainless steel |
|
|
14099802
Maedler Tensioning element stainless steel size 2 normal force 350 N hard 440 N |
|
| Product | Omschrijving |
Afbeelding |
|---|---|---|
|
10677004
Maedler |
Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
14099001
Maedler |
Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing |
|
|
77141200
Maedler |
Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 212mm, for diameter 8 mm |
|
|
10099613
Maedler |
Sprocket KRR with hub pitch 6mm 13 teeth material stainless steel 1.4301 (AISI 304) |
|
|
10700301
Maedler |
Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side |
|
|
12600300
Maedler |
Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" |
|