Safety Couplings
Description
These clutches or hubs are used if the torque must only be transmitted up to a certain, adjustable value.
If the set maximum value is exceeded the coupling device starts slipping. If the torque falls below the limit again, the slipping stops.
Thus for safety reasons a separate stop mechanism for the drive unit might be required.
Friction clutches usually serve to connect two shafts.
Sliding hubs usually serve to mount a drive wheel (chain wheel, drive pulley, spur gear, friction wheel, or similar ) on a shaft.
Some types can be used for both applications as, e.g., either a drive wheel or a shaft connection can be flange mounted.
Combinations of
elastic coupling and friction clutch can also be supplied
Quelques produits de cette catégorie
| Produit | Description | IMAGE |
|---|---|---|
|
61200000
Maedler |
Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm with clamp nut |
|
|
61200100
Maedler |
Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm with clamp nut |
|
|
61200500
Maedler |
Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm with clamp nut |
|
|
61200600
Maedler |
Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm with clamp nut |
|
|
61201000
Maedler |
Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
| Products | ||
|---|---|---|
|
61242100
Maedler Friction lining for sliding hub ROBA 612420 |
|
|
61260500
Maedler Limit switch for safety clutch 220-250 V AC |
|
|
|
61200000
Maedler Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm with clamp nut |
|
|
61200002
Maedler Bush 4,2 for sliding hub FS 61200000 and 61200100 |
|
|
61200007
Maedler Adjusting nut for sliding hub FS 61200000 and 61200100 |
|
|
|
61200100
Maedler Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm with clamp nut |
|
|
61200300
Maedler Friction disc for sliding hub FS 61200000-61200100 |
|
|
61200400
Maedler Plate spring for sliding hub FS 61200000-61200100 |
|
|
|
61200500
Maedler Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm with clamp nut |
|
|
61200502
Maedler Bush 4,2 for sliding hub FS 61200500 and 61200600 |
|
|
61200507
Maedler Adjusting nut for sliding hub FS 61200500 and 61200600 |
|
|
|
61200600
Maedler Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm with clamp nut |
|
|
61200700
Maedler Friction disc for sliding hub FS 61200500-61200600 |
|
|
61200800
Maedler Plate spring for sliding hub FS 61200500-61200600 |
|
|
|
61201000
Maedler Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
|
61201200
Maedler Bush 10,3 for sliding hub FS 612010-612020 |
|
|
61203700
Maedler Adjusting ring for sliding hub FS size 350 hexagon SW 60 mm zinc-plated |
|
|
61201300
Maedler Bush 12,2 for sliding hub FS 612010-612020 |
|
|
61201400
Maedler Bush 13,7 for sliding hub FS 612010-612020 |
|
|
61201500
Maedler Friction disc for sliding hub FS 612010-612020 |
|
Vous souhaitez obtenir plus d'informations ?
Act in time ne prend en charge que les questions provenant d'utilisateurs professionnels.
Vous êtes un particulier? Le fabricant de votre machine dispose probablement des pièces nécessaires. Nous vous recommandons donc de le contacter directement.