Sprocket KRS with hub pitch 5mm 21 teeth material steel

Sprocket KRS with hub pitch 5mm 23 teeth material steel

Sprocket KRS with hub pitch 5mm 25 teeth material steel

Sprocket KRS with hub pitch 5mm 30 teeth material steel

Linear unit CTV 145

MD800 Drive Rectifier
Rated Input Current: 24A
IP40

MD800 Dual drive Inverter
In=5.5A
STO, IP40

MD800 Single drive Inverter
In=5.5A
STO, IP40

Coupling Type : MultiBeam Coupling
Configuration : 6 Beam Relieved Bore
Material : Stainless Steel
Bore B1 (mm): 16 with key
Bore B2 (mm):16 with key
Angular Compensation, Max (degrees): 7
Bore Tolerance (mm):+0.03 / -0.00
Fastener Screw Size: M4
Fastener Screw Torque (Nm): 2.85
Fastener Wrench Size (mm)3:
Max Speed (rpm) :15000
Operating Temperature (°C)-40 to +140
Peak Torque (Nm): 25
Radial Compensation, Max (mm): 0.5
Resists Axial Load: Yes
Shaft Connection: Clamp
Torsional Stiffness (Nm/rad): 364
Mass (Weight) (g) : 262
[D] Outside Diameter (mm): 31.8
[L] Length (mm): 57.2

MD800 Dual drive Inverter
In=5A
STO, IP40

MD800 Single drive Inverter
In=17A
STO, IP40

Timing belt pulley T2.5 material aluminium 24 teeth for belt width 10mm 20
T2.5/24-2 Modified according to drawing 2032HD-5201 ## behalve totaal breedte L maat die 20mm blijft ##

Sprocket KRS with hub pitch 6mm 57 teeth material steel

Linear Actuator DC ALI2-P

Two zone controller with Ai Technology
Internal ZPA logic
Connection for 2 motors and 4 sensors
Profinet / Ethernet IP / Modbus TCP
UL/ETL/CE Protection rate IP54

Planetary Gearbox

Electric Cylinder PNCE 40

BLDC-motor controller
max current (A) : 10

CON50 stroke 500mm
ratio: 24/1 ; nom speed: 12mm/s
Nominal load: 2000N
Supply Voltage 24V DC
Cable: 3m black cabel with molex Minifit connector
Without Hall sensors
Std. Steel version IP66
With brackets in Alu with Clevis
Tubecolor: Black, RAL9005, Shine 25
Piston ring color: Black

steel rubber bush PHO-V inner diameter 08mm outer diameter 22mm length of inner bush 16mm length of outer bush 10mm vulcanized version