Veiligheidskoppelingen
Omschrijving
These clutches or hubs are used if the torque must only be transmitted up to a certain, adjustable value.
If the set maximum value is exceeded the coupling device starts slipping. If the torque falls below the limit again, the slipping stops.
Thus for safety reasons a separate stop mechanism for the drive unit might be required.
Friction clutches usually serve to connect two shafts.
Sliding hubs usually serve to mount a drive wheel (chain wheel, drive pulley, spur gear, friction wheel, or similar ) on a shaft.
Some types can be used for both applications as, e.g., either a drive wheel or a shaft connection can be flange mounted.
Combinations of
elastic coupling and friction clutch can also be supplied
Enkele producten uit deze categorie
| Products | ||
|---|---|---|
|
61201600
Maedler Plate spring for sliding hub FS 612010-612020 |
|
|
61201700
Maedler Adjusting ring for sliding hub FS size 250 hexagon SW 50 mm zinc-plated |
|
|
61202000
Maedler Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
|
61203000
Maedler Sliding hub FS torque adjustable 20-90 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm |
|
|
61203200
Maedler Bush 10,3 for sliding hub FS 612030-612040 |
|
|
61203300
Maedler Bush 13,7 for sliding hub FS 612030-61240 |
|
|
61203400
Maedler Bush 21,1 for sliding hub FS 612030-612040 |
|
|
61203500
Maedler Friction disc for sliding hub FS 612030-612040 |
|
|
61203600
Maedler Plate spring for sliding hub FS 612030-612040 |
|
|
61204000
Maedler Sliding hub FS torque adjustable 40-180 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm |
|
|
61205000
Maedler Sliding hub FS torque adjustable 50-300 Nm with pilot bore 19H8 outer diameter 127mm max. bore: 40mm bush length 16mm |
|
|
61205200
Maedler Bush 16mm for sliding hub FS 612050-612060 |
|
|
61205300
Maedler Bush 19,5 for sliding hub FS 612050-612060 |
|
|
61205400
Maedler Bush 21,1 for sliding hub FS 612050-612060 |
|
|
61205500
Maedler Friction disc for sliding hub FS 612050-612060 |
|
|
61205600
Maedler Plate spring for sliding hub FS 612050-612060 |
|
|
61205700
Maedler Adjusting ring for sliding hub FS size 500 diameter 92 mm zinc-plated |
|
|
61206000
Maedler Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm |
|
|
61207000
Maedler Sliding hub FS torque adjustable 115-690 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm |
|
|
61207200
Maedler Bush 17mm for sliding hub FS 612070-612080 |
|
| Product | Omschrijving |
Afbeelding |
|---|---|---|
|
61202000
Maedler |
Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
|
61203000
Maedler |
Sliding hub FS torque adjustable 20-90 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm |
|
|
61204000
Maedler |
Sliding hub FS torque adjustable 40-180 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm |
|
|
61205000
Maedler |
Sliding hub FS torque adjustable 50-300 Nm with pilot bore 19H8 outer diameter 127mm max. bore: 40mm bush length 16mm |
|
|
61206000
Maedler |
Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm |
|
|
61207000
Maedler |
Sliding hub FS torque adjustable 115-690 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm |
|
U wenst meer prijzen of meer info te zien?
Machinebouwers of ontwerpbureaus kunnen via onderstaande link een inlog aanvragen of contact opnemen.
Bent u particulier?
De fabrikant of invoerder van uw machine beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan eerst daarmee contact op te nemen.