Tandwiel en ketting
Omschrijving
When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.
Dimensioning and Efficiency
The calculation can be made with this tool : MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.
Note regarding the Breaking Load
The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation).
Mounting and Maintenance
The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used.
Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application.
Determining the Chain Length
The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.
Note: this link reduces the load bearing capacity of the chain by 20%.
Enkele producten uit deze categorie
| Products | ||
|---|---|---|
|
10581328
Maedler Sprocket KRF with hub 08 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581412
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581414
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581415
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581416
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581418
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581419
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581420
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581422
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581425
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581428
Maedler Sprocket KRF with hub 08 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581512
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581514
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581515
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581516
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581518
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581519
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581520
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581522
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581524
Maedler Sprocket KRF with hub 08 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
| Product | Omschrijving |
Afbeelding |
|---|---|---|
|
10581328
Maedler |
Sprocket KRF with hub 08 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581412
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581414
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581415
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581416
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581418
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581419
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581420
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581422
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581425
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581428
Maedler |
Sprocket KRF with hub 08 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581512
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581514
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581515
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581516
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581518
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581519
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581520
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581522
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
|
10581524
Maedler |
Sprocket KRF with hub 08 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened |
|
U wenst meer info te zien?
Actintime ondersteunt enkel professionele gebruikers.
Bent u particulier? De fabrikant van uw toepassing beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan rechtstreeks contact met de fabrikant op te nemen.