Tandwiel en ketting

Omschrijving

When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.

Dimensioning and Efficiency 

The calculation can be made with this tool :   MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.

Note regarding the Breaking Load 

The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation). 

Mounting and Maintenance 

The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used. 

Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application. 

Determining the Chain Length 

The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.

 Note: this link reduces the load bearing capacity of the chain by 20%.


Enkele producten uit deze categorie

Products
10113800

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel

10114000

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel

10114500

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron

10115700

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron

10117600

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron

10118300

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron

10118800

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron

10120800

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel

10120900

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel

10121000

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel

10121100

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel

10121200

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel

10121300

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel

10121400

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel

10121500

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel

10121600

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel

10121700

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel

10121800

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel

10121900

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel

10122000

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel

Product Omschrijving
Afbeelding
10113800

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel

10114000

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel

10114500

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron

10115700

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron

10117600

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron

10118300

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron

10118800

Maedler

Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron

10120800

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel

10120900

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel

10121000

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel

10121100

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel

10121200

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel

10121300

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel

10121400

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel

10121500

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel

10121600

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel

10121700

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel

10121800

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel

10121900

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel

10122000

Maedler

Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel

Niet gevonden wat u zocht? Contacteer ons!

Door het versturen van dit formulier, verklaar ik mij akkoord met het privacybeleid.

Splits e-mailadressen met een komma.

U wenst meer prijzen of meer info te zien?

Machinebouwers of ontwerpbureaus kunnen via onderstaande link een inlog aanvragen of contact opnemen.

Bent u particulier?

De fabrikant of invoerder van uw machine beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan eerst daarmee contact op te nemen.

Door het versturen van dit formulier, verklaar ik mij akkoord met het privacybeleid.

Splits e-mailadressen met een komma.
  • Kogelomloopspindels
  • Precisie gerolde spindels
  • Tandwiel en ketting
  • Tandriem en poelie
  • Tandheugel en tandwiel

When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.

Dimensioning and Efficiency 

The calculation can be made with this tool :   MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.

Note regarding the Breaking Load 

The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation). 

Mounting and Maintenance 

The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used. 

Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application. 

Determining the Chain Length 

The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.

 Note: this link reduces the load bearing capacity of the chain by 20%.


10113800

Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel
Lees meer 
12,41 € 12.41 EUR

10114000

Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel
Lees meer 
12,70 € 12.700000000000001 EUR

10114500

Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron
Lees meer 
17,86 € 17.86 EUR

10115700

Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron
Lees meer 
22,53 € 22.53 EUR

10117600

Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron
Lees meer 
30,21 € 30.21 EUR

10118300

Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron
Lees meer 
41,78 € 41.78 EUR

10118800

Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron
Lees meer 
59,92 € 59.92 EUR

10120800

Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel
Lees meer 
3,05 € 3.0500000000000003 EUR

10120900

Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel
Lees meer 
3,05 € 3.0500000000000003 EUR

10121000

Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel
Lees meer 
3,05 € 3.0500000000000003 EUR

10121100

Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel
Lees meer 
2,75 € 2.75 EUR

10121200

Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel
Lees meer 
2,76 € 2.7600000000000002 EUR

10121300

Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel
Lees meer 
2,79 € 2.79 EUR

10121400

Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel
Lees meer 
2,85 € 2.85 EUR

10121500

Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel
Lees meer 
2,98 € 2.98 EUR

10121600

Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel
Lees meer 
3,07 € 3.0700000000000003 EUR

10121700

Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel
Lees meer 
2,68 € 2.68 EUR

10121800

Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel
Lees meer 
3,52 € 3.52 EUR

10121900

Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel
Lees meer 
3,69 € 3.69 EUR

10122000

Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel
Lees meer 
3,62 € 3.62 EUR