Tandwiel en ketting
Omschrijving
When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.
Dimensioning and Efficiency
The calculation can be made with this tool : MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.
Note regarding the Breaking Load
The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation).
Mounting and Maintenance
The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used.
Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application.
Determining the Chain Length
The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.
Note: this link reduces the load bearing capacity of the chain by 20%.
Enkele producten uit deze categorie
| Products | ||
|---|---|---|
|
10677004
Maedler Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
10677000
Maedler Self-lubrication roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
10611000
Maedler Sprocket KRS with hub 10 B-1 5/8x3/8" 10 teeth material steel |
|
|
10611500
Maedler Sprocket KRS with hub 10 B-1 5/8x3/8" 15 teeth material steel |
|
|
10755000
Maedler Chain KE similar to 12B-1 plastic with stainless steel |
|
|
10030100
Maedler Inner chain link type 4 / B for roller chain no. 03 pitch 5mm |
|
|
10313600
Maedler Sprocket KRS with hub 083 1/2x3/16" 36 teeth material steel |
|
|
14099001
Maedler Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing |
|
|
10033200
Maedler Sprocket KRS with hub pitch 5mm 32 teeth material steel |
|
|
10033300
Maedler Sprocket KRS with hub pitch 5mm 33 teeth material steel |
|
|
77010400
Maedler Round-link steel chain DIN 766A quality class 3 diameter 4 mm glavanic zinc-plated |
|
|
77010500
Maedler Round-link steel chain DIN 766A quality class 3 diameter 5 mm glavanic zinc-plated |
|
|
77010600
Maedler Round-link steel chain DIN 766A quality class 3 diameter 6 mm glavanic zinc-plated |
|
|
77010800
Maedler Round-link steel chain DIN 766A quality class 3 diameter 8 mm glavanic zinc-plated |
|
|
77011000
Maedler Round-link steel chain DIN 766A quality class 3 diameter 10 mm glavanic zinc-plated |
|
|
77040400
Maedler Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 56 mm for diameter 4 mm |
|
|
77040800
Maedler Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 96 mm for diameter 4 mm |
|
|
77050600
Maedler Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 95 mm for diameter 5/6 mm |
|
|
77050800
Maedler Chain wheel for round link steel chains cast iron 20 DIN 766 outer diameter 120 mm for diameter 5/6 mm |
|
|
77051200
Maedler Chain wheel for round link steel chains made of cast iron 20 DIN 766 Außendurchnesser 165mm for diameter 5/6 |
|
| Product | Omschrijving |
Afbeelding |
|---|---|---|
|
10677004
Maedler |
Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" |
|
|
14099001
Maedler |
Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing |
|
|
77011000
Maedler |
Round-link steel chain DIN 766A quality class 3 diameter 10 mm glavanic zinc-plated |
|
|
77040400
Maedler |
Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 56 mm for diameter 4 mm |
|
|
77040800
Maedler |
Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 96 mm for diameter 4 mm |
|
|
77050600
Maedler |
Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 95 mm for diameter 5/6 mm |
|
|
77050800
Maedler |
Chain wheel for round link steel chains cast iron 20 DIN 766 outer diameter 120 mm for diameter 5/6 mm |
|
|
77051200
Maedler |
Chain wheel for round link steel chains made of cast iron 20 DIN 766 Außendurchnesser 165mm for diameter 5/6 |
|
U wenst meer prijzen of meer info te zien?
Machinebouwers of ontwerpbureaus kunnen via onderstaande link een inlog aanvragen of contact opnemen.
Bent u particulier?
De fabrikant of invoerder van uw machine beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan eerst daarmee contact op te nemen.