Veiligheidskoppelingen
Omschrijving
These clutches or hubs are used if the torque must only be transmitted up to a certain, adjustable value.
If the set maximum value is exceeded the coupling device starts slipping. If the torque falls below the limit again, the slipping stops.
Thus for safety reasons a separate stop mechanism for the drive unit might be required.
Friction clutches usually serve to connect two shafts.
Sliding hubs usually serve to mount a drive wheel (chain wheel, drive pulley, spur gear, friction wheel, or similar ) on a shaft.
Some types can be used for both applications as, e.g., either a drive wheel or a shaft connection can be flange mounted.
Combinations of
elastic coupling and friction clutch can also be supplied
Enkele producten uit deze categorie
| Products | ||
|---|---|---|
|
61207300
Maedler Bush 20,6mm for sliding hub FS 612070-612080 |
|
|
61207400
Maedler Bush 22mm for sliding hub FS 612070-612080 |
|
|
61207500
Maedler Friction disc for sliding hub FS 612070-612080 |
|
|
61207600
Maedler Plate spring for sliding hub FS 612070-612080 |
|
|
61207700
Maedler Adjusting ring for sliding hub FS size 700 diameter 133 mm zinc-plated |
|
|
61208000
Maedler Sliding hub FS torque adjustable 230-1360 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm |
|
|
61232100
Maedler Friction lining for sliding hub ROBA 612320 |
|
|
61230000
Maedler Sliding hub ROBA torque adjustable 2-10 Nm outer diameter 45mm max. bore: 20mm |
|
|
61230100
Maedler Friction lining for sliding hub ROBA 612300 |
|
|
61230200
Maedler Face spanner for two-hole round nuts matching with sliding hub ROBA 612 300 00 |
|
|
61231000
Maedler Sliding hub ROBA torque adjustable 6-30 Nm outer diameter 58mm max. bore: 22mm |
|
|
61231100
Maedler Friction lining for sliding hub ROBA 61231000 |
|
|
61231200
Maedler Adjustable pin wrench matching with sliding hub ROBA 61231000 and 61232000 |
|
|
61232000
Maedler Sliding hub ROBA torque adjustable 14-70 Nm outer diameter 68mm max. bore: 25mm |
|
|
61234000
Maedler Sliding hub ROBA torque adjustable 26-130 Nm outer diameter 88mm max. bore: 35mm |
|
|
61234100
Maedler Friction lining for sliding hub ROBA 612340 |
|
|
61234200
Maedler Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 340 00 and 612 360 00 |
|
|
61236000
Maedler Sliding hub ROBA torque adjustable 50-250 Nm outer diameter 115mm max. bore: 45mm |
|
|
61236100
Maedler Friction lining for sliding hub ROBA 612360 |
|
|
61238000
Maedler Sliding hub ROBA torque adjustable 110-550 Nm outer diameter 140mm max. bore: 55mm |
|
| Product | Omschrijving |
Afbeelding |
|---|---|---|
|
61208000
Maedler |
Sliding hub FS torque adjustable 230-1360 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm |
|
|
61234200
Maedler |
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 340 00 and 612 360 00 |
|
U wenst meer prijzen of meer info te zien?
Machinebouwers of ontwerpbureaus kunnen via onderstaande link een inlog aanvragen of contact opnemen.
Bent u particulier?
De fabrikant of invoerder van uw machine beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan eerst daarmee contact op te nemen.