SV680 Servo Drive
In=12A, Imax=32A
5x DI, 1x DO, 2x AI, 1x AO
STO, IP20
Extended Safety

SV680 Servo Drive
In=12A, Imax=32A
5x DI, 1x DO, 2x AI, 1x AO
STO, IP20

SV660 Servo Drive
In=8.4A, Imax=20A,
IP20

SV660 Servo Drive
In=5.4A, Imax=14A,
IP20

SV660 Servo Drive
In=3.5A, Imax=11A,
IP20

SV660 Servo Drive
In=25.7A, Imax=64.2A,
IP20

SV660 Servo Drive
In=20.8A, Imax=52.1A,
IP20

SV660 Servo Drive
In=16.5A, Imax=41.2A,
IP20

SV660 Servo Drive
In=11.9A, Imax=29.7A,
IP20

SV660 Servo Drive
In=7.6A, Imax=23A,
IP20

SV660 Servo Drive
In=5.5A, Imax=16.9A,
IP20

SV660 Servo Drive
In=2.8A, Imax=10.1A,
IP20

SV660 Servo Drive
In=1.6A, Imax=5.8A,
IP20

SV660 Servo Drive
In=11.6A, Imax=32A,
IP20

Motion control CPU
Motion axis : 12 (4 pulse control axis + 8 EtherCAT axis)
Encoder axis : 4 channel encoder
Pulse output : 8 x 200KHz
Extension modules :16
Left side extension : 2 (Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x EtherCAT, 1 x RS485
Support : 2 x RS232 /485 extension and 1 x CAN extension
Protocols : EtherCAT, Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP
Program storage 200k step
Data storage 2Mbyte（128KB non-volatile）
Instruction execution time 20K step / 1.6ms
Dimensions(WxHxD:mm) 53x100x80
Other interface : Type C，TF card(need TF card extension module)
CAM and ITP motion : Support CAM and interpolation motion
Built in IO : 8 input / 8 output
Programming language : LD, SFC, ST, FB/FC (supports encryption functionality)
Power input : DC24V

Easy PLC with
Motion axis :5 (pulse control axis)
Encoder axis : 4 channel encoder axis
Pulse output : 8 x 200KHz
Extension modules : 16
Left side extension : 2(Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x RS485, Support 2 x RS232 /485 extension and 1 x CAN extension
Protocols : Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP(under development）
Program storage 128K step
Data storage 1Mbyte（128KB non-volatile）
Instruction execution time 20K step / 2ms
Dimensions(WxHxD:mm) 53x100x80
Other interface Type C，TF card(need TF card extension module)
CAM and ITP motion Support CAM and interpolation motion
Built in IO 8 input / 8 output
Programming language LD、SFC、FB/FC(support encryption functionality), ST(under development)
Power input DC24V

Bansbach Easylift Gas Traction Spring
Pull-in Force: 400N
Force Progressivity approx. 25%
Hinge eyes on both sides Ø8.2mm

Hybrid stepper linear actuator

IR-R10 High-Performance 6- AXIS Robot
Controller type IRCB501 Series included

IR-R20 High-Performance 6- AXIS Robot
Controller type IRCB501 Series included