Tandwiel en ketting

Omschrijving

When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.

Dimensioning and Efficiency 

The calculation can be made with this tool :   MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.

Note regarding the Breaking Load 

The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation). 

Mounting and Maintenance 

The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used. 

Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application. 

Determining the Chain Length 

The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.

 Note: this link reduces the load bearing capacity of the chain by 20%.


Enkele producten uit deze categorie

Products
10177176G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210

10177183

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210

10177183G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210

10177188G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215

10178117

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008

10178118

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008

10178119

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008

10178120

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008

10178121

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008

10178122

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108

10178123

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210

10178124

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210

10178125

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210

10178126

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210

10178127

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210

10178128

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210

10178130

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210

10181010

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

10181011

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

10181012

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

Product Omschrijving
Afbeelding
10177176G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210

10177183

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210

10177183G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210

10177188G

Maedler

Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215

10178117

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008

10178118

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008

10178119

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008

10178120

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008

10178121

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008

10178122

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108

10178123

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210

10178124

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210

10178125

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210

10178126

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210

10178127

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210

10178128

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210

10178130

Maedler

Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210

10181010

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

10181011

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

10181012

Maedler

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened

Niet gevonden wat u zocht? Contacteer ons!

Door het versturen van dit formulier, verklaar ik mij akkoord met het privacybeleid.

Splits e-mailadressen met een komma.

U wenst meer prijzen of meer info te zien?

Machinebouwers of ontwerpbureaus kunnen via onderstaande link een inlog aanvragen of contact opnemen.

Bent u particulier?

De fabrikant of invoerder van uw machine beschikt waarschijnlijk over de nodige onderdelen. We raden dan ook aan eerst daarmee contact op te nemen.

Door het versturen van dit formulier, verklaar ik mij akkoord met het privacybeleid.

Splits e-mailadressen met een komma.
  • Kogelomloopspindels
  • Precisie gerolde spindels
  • Tandwiel en ketting
  • Tandriem en poelie
  • Tandheugel en tandwiel

When used properly, high quality roller chains are powerful and reliable drive systems. They can serve to bridge large centre distances. Various transmission ratios can be realized, independently of the centre distance. In Europe mainly roller chains according to DIN ISO 606 (formerly DIN 8187) are used.

Dimensioning and Efficiency 

The calculation can be made with this tool :   MÄDLER - Tools (eassistant.eu) or refer to page 41 or refer to the e-catalogue to determine a chain drive. With proper lubrication the degree of efficiency is approx. 98 %.

Note regarding the Breaking Load 

The DIN ISO 606 (formerly DIN 8187) specifies the minimum breaking load for each chain size. When this breaking load is exceeded, the chain is destroyed. Roller chains should be loaded with no more than one sixth of the stated breaking load, to avoid an early plastic deformation (permanent elongation). 

Mounting and Maintenance 

The shafts must be set in parallel. The sprockets must be aligned. The slack span should amount to approx 1% to max 2% of the centre distance. For this purpose we recommend mounting a chain tensioner. Large centre distances require a support (guide rail) to be used. 

Chain drives must always be well lubricated. Lubricants and lubrication methods depend on the specific application. 

Determining the Chain Length 

The chain length can be stated in meter or mm, or by stating the number of links. In the latter case, inner and outer links are counted. The chains are usually delivered open. The last link on both ends is an inner link. This leads to an uneven number of links. If a straight connecting ling is used, the closed chain strand has an even number of links. An uneven number of links in a closed strand can only be realized by using a cranked link.

 Note: this link reduces the load bearing capacity of the chain by 20%.


10177176G

Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210
Lees meer 
30,18 € 30.18 EUR

10177183

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210
Lees meer 
55,44 € 55.44 EUR

10177183G

Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210
Lees meer 
44,06 € 44.06 EUR

10177188G

Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215
Lees meer 
68,03 € 68.03 EUR

10178117

Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008
Lees meer 
6,22 € 6.22 EUR

10178118

Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008
Lees meer 
7,17 € 7.17 EUR

10178119

Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008
Lees meer 
7,35 € 7.3500000000000005 EUR

10178120

Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008
Lees meer 
7,86 € 7.86 EUR

10178121

Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008
Lees meer 
7,06 € 7.0600000000000005 EUR

10178122

Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108
Lees meer 
7,58 € 7.58 EUR

10178123

Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
7,98 € 7.98 EUR

10178124

Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
8,55 € 8.55 EUR

10178125

Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
9,13 € 9.13 EUR

10178126

Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
9,85 € 9.85 EUR

10178127

Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
10,13 € 10.13 EUR

10178128

Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
10,93 € 10.93 EUR

10178130

Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210
Lees meer 
12,56 € 12.56 EUR

10181010

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened
Lees meer 
17,23 € 17.23 EUR

10181011

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened
Lees meer 
17,23 € 17.23 EUR

10181012

Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened
Lees meer 
17,23 € 17.23 EUR