Controller for 2 actuators in parallel

MD200 Drive

MD500 Drive
Rated Voltage : 3 * 400 V
Normal Duty : 37 kW / 75 A
Heavy Duty : 30 kW / 60 A

MD200 Drive

MD200 Drive

MD200 Drive

MD200 Drive

Motion control CPU
Motion axis : 32 (pulse control axis + EtherCAT axis)
Encoder axis : 4 channel encoder
Pulse output : 8 x 200KHz
Extension modules :16
Left side extension : 2 (Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x EtherCAT, 1 x RS485
Support : 2 x RS232 /485 extension and 1 x CAN extension
Protocols : EtherCAT, Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP (under development）
Program storage 200k step
Data storage 2Mbyte（128KB non-volatile）
Instruction execution time 20K step / 1.6ms
Dimensions(WxHxD:mm) 53x100x80
Other interface : Type C，TF card(need TF card extension module)
CAM and ITP motion : Support CAM and interpolation motion
Built in IO : 8 input / 8 output
Programming language : LD、SFC、FB/FC(support encryption functionality), ST(under development)
Power input : DC24V

PLC
Motion axis : 5 (pulse control axis)
Encoder axis : 4 channel encoder axis
Pulse output : 8 x 200KHz
Extension modules : 16
Left side extension 2(Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 1 x RS232, 1 x RS485 ; Support 1 x RS232 /485 extension and 1 x CAN extension
Protocols Serial free protocol, Modbus RTU/ASC, CANlink, CANopen
Program storage 128K step
Data storage 1Mbyte（128KB non-volatile）
Instruction execution time 20K step / 2ms
Dimensions(WxHxD:mm) 40x100x83
Other interface Type C，TF card(need TF card extension module)
CAM and ITP motion Support CAM and interpolation motion
Built in IO 8 input / 8 output
Programming language LD、SFC、FB/FC(support encryption functionality), ST(under development)
Power input DC24V

Easy PLC with
Motion axis :5 (pulse control axis)
Encoder axis : 4 channel encoder axis
Pulse output : 8 x 200KHz
Extension modules : 16
Left side extension : 2(Support communication/digital IO/analog IO/TF card/RTC)
Communication Port : 2 x Ethernet, 1 x RS485, Support 2 x RS232 /485 extension and 1 x CAN extension
Protocols : Serial free protocol, Modbus RTU/ASC, CANlink, CANopen, Modbus TCP, EIP(under development）
Program storage 128K step
Data storage 1Mbyte（128KB non-volatile）
Instruction execution time 20K step / 2ms
Dimensions(WxHxD:mm) 53x100x80
Other interface Type C，TF card(need TF card extension module)
CAM and ITP motion Support CAM and interpolation motion
Built in IO 8 input / 8 output
Programming language LD、SFC、FB/FC(support encryption functionality), ST(under development)
Power input DC24V

Programmable controller for stepping motor
Max 6A/phase

Stepper motor driver for AZ series
Full closed loop control

MD800 Single Drive Unit 400V
Pn= 0.75kW
with STO function
IP40

MD800 Drive - rectifier 15kW 400V

Controller for 2 actuators in parallel
Configured for Con50, 24VDC (8A)

MD200 Drive

AM600 advanced motion controller
16 x high-speed inputs, 8 x high-speed outputs (source type, requires connectors, see below FCN-40),
1 x RS485, 1 x CAN port, 1 x Ethernet port, 1 x USB, supports up to 32 axes control

Intel Core 2, Duo i5 processor, 2.4 GHz
DDR 4 GB, SSD 128 GB
dot matrix digital display module 128 x 64 dots, 4 keys, EtherCAT bus master station, LAN x4, USB2.0 x2, USB3.0 x2, RS485 x1, RS232 x1, 3 DIs, 2 DOs

MD800 Dual Drive 400V
Pn= 3.0kW
with STO function
IP40

Concens Control and protection board for electrical Actuators - DIN mounting
- adjustable start & stop ramp
- adjustable current limit
- Continuous or impulse mode