Timing belt and pulley
Description
Timing belt drives ensure quiet operation and synchronous power transmission. Because they are maintenance-free, these drives are highly cost-effective. Due to changing requirements and considering the latest developments, there are a large number of different profiles, belt types, and pulleys available on the market. When non-positive drives (e.g., V-belt systems) are replaced, it is worth considering whether a conversion to a positive power transmission can be allowed from a safety perspective (some drives require slipping under overload). Selection and Sizing: The material of the belt and the type of timing belt must be chosen with consideration for the specific situation (e.g., required characteristics related to the machine or the environment). There are performance tables and a user-friendly calculation program to assist you in selecting the correct size. Small pulley diameters shorten the lifespan, and at least 6 teeth should be engaged at all times. When consulting the performance tables, various application-specific operating factors should be taken into account. Installation and Maintenance: At least one pulley must be equipped with flanges. The shafts must be parallel (deviation < +0.5°). The belt should not be overloaded during installation. Adequate adjustment options in the system should be provided for the assembly and adjustment of the ideal belt. Belt Tension: Each belt requires a certain pretension, depending on the type of belt, pulley diameter, center distance, and the tangential force to be transmitted. The total sum of tension and peripheral force should not exceed the allowed tensile strength of the belt. Belt tension is best adjusted by changing the center distance. Alternatively, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment. Efficiency: Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the efficiency can reach 98%. Belts with tension cords made of fiberglass (HTD and Inch) are particularly flexible.
Selection and sizing
The belt material and timing belt type must be chosen taking into account the specific situation (e.g. required characteristics related to the machine or the environment). There are performance tables and an easy-to-use calculation program to help you select the right size. Small pulley diameters shorten lifetime. And at least 6 teeth must be engaged at any time. When consulting the performance tables, several application-specific operating factors must be taken into account.
Assembly and maintenance
At least one pulley must be equipped with flanges. The axes must be parallel (deviation < +0.5°). The belt must not be overloaded during installation. For mounting and adjustment of the ideal belt, sufficient adjustment options must be provided in the system..
Belt tension
Each belt requires a certain pretension, depending on the type of belt, the diameter of the pulleys, the center distance and the tangential force to be transmitted. The total sum of the tension and the peripheral force must not exceed the permitted tensile force of the belt. The belt tension can best be adjusted by changing the center distance. Otherwise, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment..
Efficiency
Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the degree of efficiency can reach 98%. Belts with tensile bands made of fiberglass cords (HTD and Inch) are particularly flexible..
Some products in this category
| Products | ||
|---|---|---|
|
18452900
Maedler Neoprene timing belt 510 H 102 teeth belt width 075=19.1mm |
|
|
18453100
Maedler Neoprene timing belt 540 H 108 teeth belt width 075=19.1mm |
|
|
18453300
Maedler Neoprene timing belt 570 H 114 teeth belt width 075=19.1mm |
|
|
18453500
Maedler Neoprene timing belt 600 H 120 teeth belt width 075=19.1mm |
|
|
18453700
Maedler Neoprene timing belt 630 H 126 teeth belt width 075=19.1mm |
|
|
18453900
Maedler Neoprene timing belt 660 H 132 teeth belt width 075=19.1mm |
|
|
18454100
Maedler Neoprene timing belt 700 H 140 teeth belt width 075=19.1mm |
|
|
18454300
Maedler Neoprene timing belt 750 H 150 teeth belt width 075=19.1mm |
|
|
18454500
Maedler Neoprene timing belt 800 H 160 teeth belt width 075=19.1mm |
|
|
18454700
Maedler Neoprene timing belt 850 H 170 teeth belt width 075=19.1mm |
|
|
18461300
Maedler Neoprene timing belt 240 H 48 teeth belt width 100=25.4mm |
|
|
18462900
Maedler Neoprene timing belt 510 H 102 teeth belt width 100=25.4mm |
|
|
18455000
Maedler Neoprene timing belt 900 H 180 teeth belt width 075=19.1mm |
|
|
18455600
Maedler Neoprene timing belt 1000 H 200 teeth belt width 075=19.1mm |
|
|
18456100
Maedler Neoprene timing belt 1100 H 220 teeth belt width 075=19.1mm |
|
|
18456900
Maedler Neoprene timing belt 1250 H 250 teeth belt width 075=19.1mm |
|
|
18457800
Maedler Neoprene timing belt 1400 H 280 teeth belt width 075=19.1mm |
|
|
18459900
Maedler Fixing plate for timing belts material aluminium H belt width 075=19.1mm |
|
|
18460000
Maedler Neoprene timing belt H=1/2" (12.7mm) width 100=25.4mm open length |
|
|
18461500
Maedler Neoprene timing belt 270 H 54 teeth belt width 100=25.4mm |
|
| Product | DESCRIPTIOn |
PICTURE |
|---|---|---|
Would you like to get your best price or more information about this product?
Machine builders or engineering companies can request a login via the link below or contact us immediately.
Are you a private customer?
The manufacturer or importer of your machine probably has the necessary parts. We therefore recommend contacting them first.