Timing belt and pulley
Description
Timing belt drives ensure quiet operation and synchronous power transmission. Because they are maintenance-free, these drives are highly cost-effective. Due to changing requirements and considering the latest developments, there are a large number of different profiles, belt types, and pulleys available on the market. When non-positive drives (e.g., V-belt systems) are replaced, it is worth considering whether a conversion to a positive power transmission can be allowed from a safety perspective (some drives require slipping under overload). Selection and Sizing: The material of the belt and the type of timing belt must be chosen with consideration for the specific situation (e.g., required characteristics related to the machine or the environment). There are performance tables and a user-friendly calculation program to assist you in selecting the correct size. Small pulley diameters shorten the lifespan, and at least 6 teeth should be engaged at all times. When consulting the performance tables, various application-specific operating factors should be taken into account. Installation and Maintenance: At least one pulley must be equipped with flanges. The shafts must be parallel (deviation < +0.5°). The belt should not be overloaded during installation. Adequate adjustment options in the system should be provided for the assembly and adjustment of the ideal belt. Belt Tension: Each belt requires a certain pretension, depending on the type of belt, pulley diameter, center distance, and the tangential force to be transmitted. The total sum of tension and peripheral force should not exceed the allowed tensile strength of the belt. Belt tension is best adjusted by changing the center distance. Alternatively, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment. Efficiency: Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the efficiency can reach 98%. Belts with tension cords made of fiberglass (HTD and Inch) are particularly flexible.
Selection and sizing
The belt material and timing belt type must be chosen taking into account the specific situation (e.g. required characteristics related to the machine or the environment). There are performance tables and an easy-to-use calculation program to help you select the right size. Small pulley diameters shorten lifetime. And at least 6 teeth must be engaged at any time. When consulting the performance tables, several application-specific operating factors must be taken into account.
Assembly and maintenance
At least one pulley must be equipped with flanges. The axes must be parallel (deviation < +0.5°). The belt must not be overloaded during installation. For mounting and adjustment of the ideal belt, sufficient adjustment options must be provided in the system..
Belt tension
Each belt requires a certain pretension, depending on the type of belt, the diameter of the pulleys, the center distance and the tangential force to be transmitted. The total sum of the tension and the peripheral force must not exceed the permitted tensile force of the belt. The belt tension can best be adjusted by changing the center distance. Otherwise, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment..
Efficiency
Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the degree of efficiency can reach 98%. Belts with tensile bands made of fiberglass cords (HTD and Inch) are particularly flexible..
Some products in this category
| Products | ||
|---|---|---|
|
16691300
Maedler timing bar AT5 13 teeth length 140mm material aluminium |
|
|
16691400
Maedler timing bar AT5 14 teeth length 140mm material aluminium |
|
|
16691500
Maedler timing bar AT5 15 teeth length 140mm material aluminium |
|
|
16691600
Maedler timing bar AT5 16 teeth length 140mm material aluminium |
|
|
16691700
Maedler timing bar AT5 17 teeth length 140mm material aluminium |
|
|
16691800
Maedler timing bar AT5 18 teeth length 140mm material aluminium |
|
|
16691900
Maedler timing bar AT5 19 teeth length 140mm material aluminium |
|
|
16692000
Maedler timing bar AT5 20 teeth length 160mm material aluminium |
|
|
16692100
Maedler timing bar AT5 21 teeth length 160mm material aluminium |
|
|
16692200
Maedler timing bar AT5 22 teeth length 160mm material aluminium |
|
|
16692300
Maedler timing bar AT5 23 teeth length 160mm material aluminium |
|
|
16692400
Maedler timing bar AT5 24 teeth length 160mm material aluminium |
|
|
16692500
Maedler timing bar AT5 25 teeth length 160mm material aluminium |
|
|
16692600
Maedler timing bar AT5 26 teeth length 160mm material aluminium |
|
|
16692700
Maedler timing bar AT5 27 teeth length 160mm material aluminium |
|
|
16692800
Maedler timing bar AT5 28 teeth length 160mm material aluminium |
|
|
16693000
Maedler timing bar AT5 30 teeth length 160mm material aluminium |
|
|
16693200
Maedler timing bar AT5 32 teeth length 160mm material aluminium |
|
|
16693400
Maedler timing bar AT5 34 teeth length 160mm material aluminium |
|
|
16693600
Maedler timing bar AT5 36 teeth length 160mm material aluminium |
|
| Product | DESCRIPTIOn |
PICTURE |
|---|---|---|
U wenst meer info te zien?
Actintime only supports professional users. Are you a private user? The manufacturer of your application probably has the necessary parts. We therefore recommend contacting the manufacturer directly..