AM600 advanced motion controller
16 x high-speed inputs, 8 x high-speed outputs (source type, requires connectors, see below FCN-40),
1 x RS485, 1 x CAN port, 1 x Ethernet port, 1 x USB, supports up to 32 axes control

GL20 expansion module
4 x analog outputs module (resolution 16 bits, sampling time 250 µs)

Intel Core 2, Duo i5 processor, 2.4 GHz
DDR 4 GB, SSD 128 GB
dot matrix digital display module 128 x 64 dots, 4 keys, EtherCAT bus master station, LAN x4, USB2.0 x2, USB3.0 x2, RS485 x1, RS232 x1, 3 DIs, 2 DOs

MD800 Dual Drive 400V
Pn= 3.0kW
with STO function
IP40

Concens Control and protection board for electrical Actuators - DIN mounting
- adjustable start & stop ramp
- adjustable current limit
- Continuous or impulse mode

MD200 Drive

MD200 Drive

MD800 Dual Drive 400V
drive for ND: 2x 0.75kW
HD: 2x0.4kW
With STO function

IT7100 HMI
10.1" LCD screen, 1024*600 resolution, 24bit true colour
2x RS485, 1x RS232, 1x USB slave, 1x USB host, 1x SD card slot, 1x Ethernet, built-in RTC
IP65 frontside, IP20 back side

IT7150 HMI
15.0" LCD screen, 1600*1200 resolution, 24bit true colour
2x RS485, 1x RS232, 1x USB slave, 1x USB host, 1x SD card slot, 1x Ethernet, built-in RTC
IP65 frontside, IP20 back side.

IT7070 HMI
7.0" LCD Display, Resolution: 800*480, 24bit true colour
1x RS485, 1x USB slave, 1x USB host, 1x SD card slot, integrated RTC
IP65 from frontside, IP20 from backside

EMC filter

MD800 Dual Drive Unit 200V
Pn=1.5kW
With STO function
IP40

MD800 Drive

Communication cable for PC

MD800 Dual Drive Unit 2x 0,4kW 0-230V

MD200 Drive

MD200 Drive - NC Series
Un=1x 240VAC
In=8A, Pn=1.5kW
4x DI + 1x DIO(NPN/PNP), 1x RO, 1x AI, 1x AO, V/f only

Cable set for CVD2B driver
+ contains a power supply cable and an I/O signal cable.

Easy PLC with :
Motion axis : 16 (pulse control axis + EtherCAT axis)
Encoder axis : 4 channel encoder axis
Pulse output : 8 x 200KHz
Extension modules : 16
Left side extension 2(Support communication/digital IO/analog IO/TF card/RTC)
Communication Port 1 x EtherCAT, 1 x RS485, Support 2 x RS232 /485 extension and 1 x CAN extension
Protocols : EtherCAT, Serial free protocol, Modbus RTU/ASC, CANlink, CANopen
Program storage 200K step
Data storage : 2Mbyte（128KB non-volatile）
Instruction execution time 20K step / 2ms
Dimensions(WxHxD:mm) 53x100x80
Other interface Type C，TF card(need TF card extension module) CAM and ITP motion Support CAM and interpolation motion
Built in IO : 8 input / 8 output
Programming language LD、SFC、FB/FC(support encryption functionality), ST(under development)
Power input DC24V