Safety Couplings
Description
These clutches or hubs are used if the torque must only be transmitted up to a certain, adjustable value.
If the set maximum value is exceeded the coupling device starts slipping. If the torque falls below the limit again, the slipping stops.
Thus for safety reasons a separate stop mechanism for the drive unit might be required.
Friction clutches usually serve to connect two shafts.
Sliding hubs usually serve to mount a drive wheel (chain wheel, drive pulley, spur gear, friction wheel, or similar ) on a shaft.
Some types can be used for both applications as, e.g., either a drive wheel or a shaft connection can be flange mounted.
Combinations of
elastic coupling and friction clutch can also be supplied
Quelques produits dans cette catégorie
| ProduITs | ||
|---|---|---|
|
61242100
Maedler Friction lining for sliding hub ROBA 612420 |
|
|
61260500
Maedler Limit switch for safety clutch 220-250 V AC |
|
|
61200000
Maedler Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges |
|
|
61200002
Maedler Bush 4,2 for sliding hub FS 61200000 and 61200100 |
|
|
61200007
Maedler Adjusting nut for sliding hub FS 61200000 and 61200100 |
|
|
61200100
Maedler Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges |
|
|
61200300
Maedler Friction disc for sliding hub FS 61200000-61200100 |
|
|
61200400
Maedler Plate spring for sliding hub FS 61200000-61200100 |
|
|
61200500
Maedler Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges |
|
|
61200502
Maedler Bush 4,2 for sliding hub FS 61200500 and 61200600 |
|
|
61200507
Maedler Adjusting nut for sliding hub FS 61200500 and 61200600 |
|
|
61200600
Maedler Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges |
|
|
61200700
Maedler Friction disc for sliding hub FS 61200500-61200600 |
|
|
61200800
Maedler Plate spring for sliding hub FS 61200500-61200600 |
|
|
61201000
Maedler Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
|
61201200
Maedler Bush 10,3 for sliding hub FS 612010-612020 |
|
|
61203700
Maedler Adjusting ring for sliding hub FS size 350 hexagon SW 60 mm zinc-plated |
|
|
61201300
Maedler Bush 12,2 for sliding hub FS 612010-612020 |
|
|
61201400
Maedler Bush 13,7 for sliding hub FS 612010-612020 |
|
|
61201500
Maedler Friction disc for sliding hub FS 612010-612020 |
|
| Produit | Description | IMAGE |
|---|---|---|
|
61200000
Maedler |
Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges |
|
|
61200100
Maedler |
Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges |
|
|
61200500
Maedler |
Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges |
|
|
61200600
Maedler |
Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges |
|
|
61201000
Maedler |
Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|
Vous souhaitez voir les prix ou plus d'informations?
Comme professionnel, contactez-nous via le lien ci-dessous ou demandez-nous un login d'accès à nos services.
Act In Time Mécatronique ne s’adressant qu’aux entreprises, nous ne pourrons pas répondre aux demandes de particuliers.