Timing belt and pulley
Description
Timing belt drives ensure quiet operation and synchronous power transmission. Because they are maintenance-free, these drives are highly cost-effective. Due to changing requirements and considering the latest developments, there are a large number of different profiles, belt types, and pulleys available on the market. When non-positive drives (e.g., V-belt systems) are replaced, it is worth considering whether a conversion to a positive power transmission can be allowed from a safety perspective (some drives require slipping under overload). Selection and Sizing: The material of the belt and the type of timing belt must be chosen with consideration for the specific situation (e.g., required characteristics related to the machine or the environment). There are performance tables and a user-friendly calculation program to assist you in selecting the correct size. Small pulley diameters shorten the lifespan, and at least 6 teeth should be engaged at all times. When consulting the performance tables, various application-specific operating factors should be taken into account. Installation and Maintenance: At least one pulley must be equipped with flanges. The shafts must be parallel (deviation < +0.5°). The belt should not be overloaded during installation. Adequate adjustment options in the system should be provided for the assembly and adjustment of the ideal belt. Belt Tension: Each belt requires a certain pretension, depending on the type of belt, pulley diameter, center distance, and the tangential force to be transmitted. The total sum of tension and peripheral force should not exceed the allowed tensile strength of the belt. Belt tension is best adjusted by changing the center distance. Alternatively, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment. Efficiency: Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the efficiency can reach 98%. Belts with tension cords made of fiberglass (HTD and Inch) are particularly flexible.
Selection and sizing
The belt material and timing belt type must be chosen taking into account the specific situation (e.g. required characteristics related to the machine or the environment). There are performance tables and an easy-to-use calculation program to help you select the right size. Small pulley diameters shorten lifetime. And at least 6 teeth must be engaged at any time. When consulting the performance tables, several application-specific operating factors must be taken into account.
Assembly and maintenance
At least one pulley must be equipped with flanges. The axes must be parallel (deviation < +0.5°). The belt must not be overloaded during installation. For mounting and adjustment of the ideal belt, sufficient adjustment options must be provided in the system..
Belt tension
Each belt requires a certain pretension, depending on the type of belt, the diameter of the pulleys, the center distance and the tangential force to be transmitted. The total sum of the tension and the peripheral force must not exceed the permitted tensile force of the belt. The belt tension can best be adjusted by changing the center distance. Otherwise, a smooth idler pulley on the outside or a toothed one on the inside of the belt can be used for adjustment..
Efficiency
Depending on the type of belt (flexibility) and the number of teeth on the pulley (bending), the degree of efficiency can reach 98%. Belts with tensile bands made of fiberglass cords (HTD and Inch) are particularly flexible..
Some products in this category
| Products | ||
|---|---|---|
|
17532800
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1200mm 150 teeth |
|
|
17533000
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1280mm 160 teeth |
|
|
17533200
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1360mm 170 teeth |
|
|
17533400
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1440mm 180 teeth |
|
|
17533700
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1600mm 200 teeth |
|
|
17534000
Maedler Neoprene timing belt HTD 8M width 30mm Lw 1760mm 220 teeth |
|
|
17534400
Maedler Neoprene timing belt HTD 8M width 30mm Lw 2000mm 250 teeth |
|
|
17534800
Maedler Neoprene timing belt HTD 8M width 30mm Lw 2400mm 300 teeth |
|
|
17535200
Maedler Neoprene timing belt HTD 8M width 30mm Lw 2800mm 350 teeth |
|
|
17539900
Maedler Fixing plate for timing belts material aluminium HTD 8M belt width 30mm |
|
|
17539900L
Maedler Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 55mm |
|
|
17550000
Maedler Neoprene timing belt HTD 8M width 50mm 8M-50 open length |
|
|
17550500
Maedler Neoprene timing belt HTD 8M width 50mm Lw 480mm 60 teeth |
|
|
17550700
Maedler Neoprene timing belt HTD 8M width 50mm Lw 560mm 70 teeth |
|
|
17550900
Maedler Neoprene timing belt HTD 8M width 50mm Lw 600mm 75 teeth |
|
|
17551100
Maedler Neoprene timing belt HTD 8M width 50mm Lw 640mm 80 teeth |
|
|
17553200
Maedler Neoprene timing belt HTD 8M width 50mm Lw 1360mm 170 teeth |
|
|
17551700
Maedler Neoprene timing belt HTD 8M width 50mm Lw 800mm 100 teeth |
|
|
17553400
Maedler Neoprene timing belt HTD 8M width 50mm Lw 1440mm 180 teeth |
|
|
17566300
Maedler Polyurethane timing belt HTD 8M width 30mm 8M-30 open length |
|
| Product | DESCRIPTIOn |
PICTURE |
|---|---|---|
|
17539900L
Maedler |
Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 55mm |
|
U wenst meer info te zien?
Actintime only supports professional users. Are you a private user? The manufacturer of your application probably has the necessary parts. We therefore recommend contacting the manufacturer directly..